Struggling with organic conversions in Class 12? You are not alone. Questions like “convert benzene to aniline” or “convert ethanol to propanoic acid” carry solid marks in board exams, NEET, and JEE. Many students lose those marks because they try to memorise answers instead of understanding how one functional group changes into another.
This guide shows you a simple way to approach organic conversions: learn the basic reactions, think backwards from the target compound, and always look for the shortest route. Along with the tips, you will find 25 organic reaction maps and conversion charts covering alkanes, alkenes, alkynes, alkyl halides, alcohols, phenols, carbonyl compounds, amines, aniline, benzene, and Grignard reagents. Before you begin, make sure your basics of General Organic Chemistry (GOC) are clear, because electron effects and reaction mechanisms are what make every conversion logical.

What are organic conversions or organic chemistry conversions?
Converting one organic compound to another organic compound, by using one or more other organic compounds or reagents by a single or multiple steps are called as organic conversions. The basic organic reactions are building blocks for the conversion in organic chemistry.
What are the most easy ways for organic conversions in organic chemistry class 12?
In order to do the organic conversions in an easy way, you need to learn about the basic organic chemistry reactions which are provided to us in chapter in the form of preparation of a particular compound and chemical properties of it. You need to remember these organic reactions.
Don’t try to rote learn the organic conversions or organic reactions.
Try to write the organic reactions and practice writing as many organic reactions as you can. It will help you to learn them easily.
Tip (which I followed): Prepare a organic conversion chart and paste it on a wall in your room where you can see the chart clearly. If you are doing some other work than studying. Try to look at the chart casually. Remember don’t try to learn the reactions, just look at chart how reactions are occurring. After some days, you will realise that you can remember the organic conversions very well.
I have attached organic conversion charts within the post, to reduce your burden of writing down. Also if you have time to write it down yourself, so you should definitely write down at your own.
What is asked in exams?
Organic chemistry conversions of class 12 are major problems you have to do in examinations.
Organic conversions questions have important role in organic chemistry questions. If you practice these organic conversions properly, you can get full marks for these questions in your organic conversion class 12 examinations.
Points to remember
- You have to practice as many questions as possible.
- You have to identify which kind of organic compound is given in question and think about the basic reaction of that compound.
- Think backward. Try to think from the final product (target compound). How is the final product produced? If there are many methods, which one is the best method?
- You should have a good knowledge and memory about organic compounds, reagents & reactions and their mechanism.
It is better to start with the basic conversions, they help you to solve the higher level conversions. Learn basic reactions of organic chemistry class 11 and organic chemistry class 12. Above all, keep reading the reaction maps which you have or these which are attached here, it helps to keep you updated.
How to Solve Any Organic Conversion in 5 Steps
- Compare the carbon count. Does the target have the same number of carbons as the starting compound, more, or fewer? This tells you whether you need a step-up or step-down reaction.
- Compare the functional groups. Note exactly what has to change: –OH to –Cl, –NO₂ to –NH₂, and so on.
- Work backwards from the target. List the reactions that can produce the final compound.
- Find the meeting point. Connect your forward reactions (from the starting compound) with your backward reasoning (from the target).
- Write reagents and conditions. A conversion is incomplete without them. Check that each step gives the correct product, especially the orientation (Markovnikov or anti-Markovnikov, ortho/para or meta).
Worked Examples
1. Ethanol to propanoic acid (step up)
CH₃CH₂OH → (PBr₃) → CH₃CH₂Br → (alc. KCN) → CH₃CH₂CN → (H₃O⁺, heat) → CH₃CH₂COOH
The nitrile adds one carbon, and hydrolysis converts it into the acid.
2. Propanoic acid to ethanamine (step down)
CH₃CH₂COOH → (NH₃, then heat) → CH₃CH₂CONH₂ → (Br₂/NaOH) → CH₃CH₂NH₂
This is the Hoffmann bromamide degradation, which removes one carbon.
3. Propene to propan-1-ol (anti-Markovnikov)
CH₃CH=CH₂ → (HBr, peroxide) → CH₃CH₂CH₂Br → (aq. KOH) → CH₃CH₂CH₂OH
The peroxide reverses the orientation of HBr addition. If you are unsure why this works only for HBr, read How is Peroxide Effect Only Applicable to HBr?
4. Benzene to aniline
C₆H₆ → (conc. HNO₃ + conc. H₂SO₄, 330 K) → C₆H₅NO₂ → (Sn/HCl, then NaOH) → C₆H₅NH₂
5. Aniline to chlorobenzene
C₆H₅NH₂ → (NaNO₂ + HCl, 273–278 K) → C₆H₅N₂⁺Cl⁻ → (CuCl/HCl) → C₆H₅Cl
Keep the diazotisation temperature low, because diazonium salts decompose on warming.
Quick Reference: One-Step Organic Conversions
| Conversion | Reagent / Condition | Name or note |
|---|---|---|
| Alcohol → alkyl halide | SOCl₂, PCl₅ or PBr₃ | Gives clean products |
| Alkyl halide → alcohol | aq. KOH | Nucleophilic substitution |
| Alkyl halide → alkene | alc. KOH, heat | Dehydrohalogenation (Saytzeff rule) |
| Alkyl halide → nitrile | alc. KCN | Step up by one carbon |
| Alkene → alcohol (Markovnikov) | dil. H₂SO₄ / H₂O | Hydration |
| Alkene → alcohol (anti-Markovnikov) | B₂H₆, then H₂O₂/NaOH | Hydroboration–oxidation |
| Alkyne → cis-alkene | H₂, Lindlar’s catalyst | Partial reduction |
| Alkyne → trans-alkene | Na / liq. NH₃ | Partial reduction |
| 1° alcohol → aldehyde | PCC | Stops at aldehyde |
| 1° alcohol → carboxylic acid | Alkaline KMnO₄ or acidified K₂Cr₂O₇ | Strong oxidation |
| Aldehyde/ketone → alcohol | NaBH₄ or LiAlH₄ | Reduction |
| Carboxylic acid → alcohol | LiAlH₄ | NaBH₄ does not work here |
| Nitrile → 1° amine | LiAlH₄ or H₂/Ni | Reduction |
| Nitrile → aldehyde | SnCl₂/HCl, then H₃O⁺ | Stephen reaction |
| Amide → amine (one carbon less) | Br₂ / NaOH | Hoffmann bromamide |
| Nitro compound → amine | Sn/HCl, Fe/HCl or H₂/Pd | Reduction |
| Aniline → diazonium salt | NaNO₂ + HCl, 273–278 K | Diazotisation |
| Diazonium salt → aryl halide | CuCl/HCl or CuBr/HBr | Sandmeyer reaction |
| Diazonium salt → phenol | Warm water | |
| Diazonium salt → benzene | H₃PO₂ + H₂O | |
| Benzene → acetophenone | CH₃COCl, anhyd. AlCl₃ | Friedel–Crafts acylation |
| Phenol → salicylic acid | NaOH, then CO₂ (high pressure, ~400 K), then H⁺ | Kolbe’s reaction |
Step-Up and Step-Down Reactions
Many conversions fail simply because the carbon count doesn’t match. Keep these ready.
- Step up (add carbon): Alkyl halide + KCN gives a nitrile (+1 C). Grignard reagent + CO₂ gives a carboxylic acid (+1 C). Grignard reagent + HCHO gives a primary alcohol (+1 C). The Wurtz reaction joins two alkyl halides to form a longer alkane.
- Step down (remove carbon): Decarboxylation (sodium salt of the acid heated with soda lime) gives an alkane with one carbon less. The Hoffmann bromamide reaction converts an amide into an amine with one carbon less. The haloform reaction converts a methyl ketone into a carboxylate with one carbon less.
Common Mistakes to Avoid
- Using NaBH₄ to reduce a carboxylic acid. It only reduces aldehydes and ketones, so use LiAlH₄ for acids.
- Forgetting the temperature for diazotisation (273–278 K).
- Mixing up KCN and AgCN. KCN gives nitriles, while AgCN gives isocyanides.
- Nitrating aniline directly. In the nitrating mixture it gets protonated and gives meta products, so protect the –NH₂ group by acetylation first.
- Ignoring Markovnikov and anti-Markovnikov orientation in alkene additions.
- Skipping the carbon count and ending up with a product that has too many or too few carbons.
- Writing reagents without conditions (alc./aq., heat, temperature, dry ether).
Organic Conversions Chart

























Practice Questions
Try these on your own before checking any notes.
- Convert methanol to ethanol.
- Convert ethene to propanoic acid.
- Convert toluene to benzyl alcohol.
- Convert aniline to benzoic acid.
- Convert acetone to tert-butyl alcohol.
- Convert phenol to salicylic acid.
- Convert ethanoic acid to methanamine.
- Convert propene to propan-2-ol.
For more exam-style practice, also try 132 Important Organic Conversions for Board Exam.
Conclusion
Organic conversions become easy once you stop treating them as puzzles to memorise and start seeing them as a chain of familiar reactions. Identify the functional group you have, identify the one you need, and connect the two in as few steps as possible. Working backwards from the target compound is usually the fastest way to find the route.
Keep these charts handy, write the reactions out by hand, and practise a few conversions every day, starting with one-step problems and moving on to multi-step ones. If a reaction ever feels like it has no logic, go back to the mechanism. Our guide to reaction mechanisms in General Organic Chemistry explains the electron effects behind most of these transformations. If a conversion still gets you stuck, contact me and I will help you work through it.
Read more:
- 132 Important Organic Conversions for Board Exam
- Top 51 Must-Know Organic Chemistry Reactions
- 100+ Organic Chemistry Reasoning Questions Class 12
- 97 Reasoning Questions in Organic Chemistry for Class 12 Boards
Visit: cgchemistrysolutions

Comments are closed.