Site icon CG's Chemistry Solutions

Chapter 12 Organic Chemistry Some Basic Principles Q and A

Spread the love

In this post, you will find the questions and answers of chapter Organic Chemistry Some Basic Principles including NCERT questions.

1. What are hybridisation states of each carbon atom in the following compounds? CH2=C=O, CH3CH=CH2, (CH3)2CO, CH2=CH-CN, C6H6.

Answer: The hybridisation states of each carbon atom in the following compounds is as follows:

2. Indicate the sigma and pi bonds in the following molecules: C6H6, C6H12, CH2Cl2, CH=C=CH2, CH3NO2, HCONHCH3

Answer: The indicated sigma bond and pi bonds are represented as follows:

3. Write bond-line formulas for: Isopropyl alcohol, 2,3-Dimethylbutanal, Heptan-4-one.

Answer:

4. Give the IUPAC names of the following compounds:

Answer:  (a) Propylbenzene (b) 3-Methylpentanenitrite (c) 2, 5-Dimethylheptane (d) 3-Bromo- 3-chloroheptane (e) 3-Chloropropanal (f) 2, 2-Dichloroethanol.

Check out: Unique Guide to Organic Conversions (Cheat Sheet included)

5. Which of the following represents the correct IUPAC name for the compounds concerned? (a) 2, 2-Dimethylpentane or 2-Dimethylpentane (b) 2, 4, 7-Trimethyloctane or 2, 5, 7- Trimethyloctane (c) 2-Chloro-4-methylpentane or 4-Chloro-2-methylpentane (d) But-3-yn- l-ol or But-4-ol-yne.

Answer: (a) 2, 2-Demethylpentane (b) 2, 4, 7-Trimethyloctane. For two alkyl groups on the same carbon its locant is repeated twice, 2, 4, 7-locant set is lower than 2, 5, 7. (c) 2- Chloro-4-methylpentane. Alphabetical order of substituents, (d) But-3-yn-l-ol. Lower locant for the principal functional group, i.e., alcohol.

6. Draw formulas for the first five members of each homologous series beginning with the following compounds: (a) H—COOH (b) CH3COCH3 (c) H—CH=CH2.

Answer: (a) CH3—COOH; CH3CH2—COOH; CH3CH2CH2—COOH; CH3CH2CH2CH2—COOH; CH3CH2CH2CH2CH2—COOH

(b) CH3COCH3; CH3COCH2CH3; CH3COCH2CH2CH3; CH3COCH2CH2CH2CH3; CH3CO(CH3)4CH3

(c) H—CH=CH2; CH3CH=CH2; CH3CH2CH=CH2; CH3CH2CH2CH=CH2; CH3CH2CH2CH2CH=CH2

7. Give condensed and bond line structural formulas and identify the functional group(s) present, if any, for: (a) 2, 2, 4-Trimethylpentane (b) 2-Hydroxy-1, 2, 3-propanetricarboxylic acid (c) Hexanedial.

Answer: The condensed and bond line structural formulas and the functional group(s) present are given as:

8. Identify the functional groups in the following compounds:

Answer: The functional groups in the following compounds are as follows:

9. Which of the two: O2NCH2CH2O or CH3CH2O is expected to be more stable and why?

Answer:  O2NCH2CH2O is more stable than CH3CH2O- because NO2 group has -I effect and hence it tends to disperse the negative charge on the oxygen atom. In contrast, CH3CH2 has +I effect. It tends to intensify the negative charge on oxygen atom and hence destabilizes it.

10. Explain why alkyl groups act as electron donors when attached to a π-system.

Answer:  Due to hyperconjugation, alkyl groups act as electron donors when attached to a π- system as shown below:

11. Draw the resonance structures for the following compounds. Show the electron shift using curved-arrow notation. (a) C6H5OH (b) C6H5N02 (c)  CH3CH=CHCHO (d) C6H5—CHO (e) C6H5—CH(f) Ch3Ch=ChCh2

Answer: The resonance structures for the following compounds are as follows:

12. What are electrophiles and nucleophiles? Explain with examples:

Answer:  Electrophiles: The name electrophiles means electron loving. Electrophiles are electron deficient. They may be positive ions or neutral molecules, e.g., H+, Cl+, Br+, NO2+, R3C+, RN2+, AlCl3, BF3, etc.

Nucleophiles: The name nucleophiles means ‘nucleus loving’ and indicates that it attacks the region of low electron density (positive centres) in a substrate molecule. They are electron rich they may be negative ions or neutral molecules, e.g., Cl Br, CN, OH, RCR2, NH3, RNH2, H2O, ROH etc.

13. Identify the reagents shown in italic in the following equations as nucleophiles or electrophiles
(a) CH3COOH + HO  CH3COO + H2O
(b) CH3COCH3 + CN (CH3)2C(CN)(OH)
(c) C6H6 + CH3CO+ C6H5COCH3

Answer: Nucleophiles: (a) and (b) and Electrophile : (c)

14. Classify the following reactions in one of the reaction type studied in this unit.
(a) CH3CH2Br + HS  CH3CH2SH + Br
(b) (CH3)2C=CH2 + HCl (CH3)2C(Cl)CH3
(c) CH3CH2Br + HO  CH2=CH2 + H2O + Br
(d) (CH3)3CCH2OH + HBr (CH3)2C(Br)CH2CH2CH3 + H2O

Answer: (a) Nucleophilic substitution (b) Electrophilic addition (c) Bimolecular elimination (d) Nucleophilic substitution with rearrangement.

15. What is the relationship between the members of following pairs of structures? Are they structural or geometrical isomers or resonance contributors?

Answer: (a) Structural isomers (actually position isomers as well as metamers) (b) geometrical isomers (c) resonance contributors because they differ in the position of electrons but not atoms.

16. For the following bond cleavages, use curved-arrows to show the electron flow and classify each as homolysis or heterolysis. Identify reactive intermediate produced as free radical, carbocation and carbanion.

Answer:

17. Explain the terms inductive and electromeric effects. Which electron displacement effect explain the following correct orders of acidity of the carboxylic acids?
(a) Cl3CCOOH > Cl2CHCOOH > ClCHCOOH
(b) CH3CH2COOH > (CH3)2 CHCOOH > (CH3)3CCOOH

Answer: Inductive Effect: The inductive effect refers to the polarity produced in a molecule as a result of higher electronegativity of one atom compared to another. Atoms or groups which lose electron towards a carbon atom are said to have +1 Effect.
Those atoms or groups which draw electron away from a carbon atom are said to have -I Effect.

Common examples of -I effect are: —NO2, —F, —Cl, —Br, —I, —OH, etc.
Common examples of +I effect are: (CH3)2C— , (CH3)2CH—, CH3CH2—, CH3—, etc.

Electromeric effect: The electromeric effect refers to the polarity produced in a multiple bonded compound as it is approached by a reagent.

The atom A has lost its share in the electron pair and B has gained this share.
As a result A acquires a positive charge and B a negative charge. It is a temporary effect and takes place only in the presence of a reagent.
(a) -I-effect as shown below:
As the number of halogen atoms decreases, the overall -I- effect decreases and the acid strength decreases accordingly.

(b) +I-effect as shown below:
As the number of alkyl groups increases, the +I-effect increases and the acid strength decreases accordingly.

18. Give a brief description of the principles of the following techniques taking an example in each case: (a) Crystallisation (b) Distillation (c) Chromatography.

Answer: (a) Crystallisation: In this process the impure solid is dissolved in the minimum volume of a suitable solvent. The soluble impurities pass into the solution while the insoluble ones left behind. The hot solution is then filtered and allowed to cool undisturbed till crystallisation is complete. The crystals are then separated from the mother liquor by filtration and dried.
Example: crystallisation of sugar.

(b) Distillation: The operation of distillation is employed for the purification of liquids from non-volatile impurities. The impure liquid is boiled in a flask and the vapours so formed are collected and condensed to give back pure liquid in another vessel. Simple organic liquids such as benzene toluene, xylene etc. can be purified.

(c) Chromatography: Chromatography is based on the principle of selective distribution of the components of a mixture between two phases, a stationary phase and a moving phase. The stationary phase can be a solid or liquid, while the moving phase is a liquid or a gas. When the stationary phase is solid the basis is adsorption and when it is a liquid the basis is partition. Chromatography is generally used for the Reparation of coloured substances such as plant pigments or dyestuffs.

19. Describe the method, which can be used to separate two compounds with different solubilities in a solvent S.

Answer: Fractional crystallisation is used for this purpose. A hot saturated solution of these two compounds is allowed to cool, the less soluble compound crystallises out while the more soluble remains in the solution. The crystals are separated from the mother liquor and the mother liquor is again concentrated and the hot solution again allowed to cool when the crystals of the second compound are obtained. These are again filtered and dried.

20. What is the difference between distillation, distillation under reduced pressure and steam distillation?

Answer: Distillation is used in case of volatile liquid mixed with non-volatile impurities.
Distillation under reduced pressure: This method is used to purify such liquids which have very high boiling points and which decompose at or below their boiling points.
Steam distillation is used to purify steam volatile liquids associated with water immiscible impurities.

21. Discuss the chemistry of Lassaigne’s test.

Answer:  Lassaigne’s test: Nitrogen, sulphur, halogens and phosphorous present in an organic compound are detected by Lassaigne’s test.
First of all compounds are converted to ionic form by fusing the compound with sodium metal.

Cyanide, sulphide or halide of sodium are extracted from the fused mass by boiling it with distilled water. This extract is known as sodium fusion extract.

22. Differentiate between the principle of estimation of nitrogen in an organic compound by (i) Dumas method (ii) Kjeldahl’s method.

Answer: (i) Dumas method: The organic compound is heated strongly with excess of CuO ‘ (Cupric Oxide) in an atmosphere of CO2 when free nitrogen, CO2 and H2O are obtained.

(ii) Kjeldahl’s method: A known mass of the organic compound is heated strongly with cone. H2SO4, a little potassium sulphate and a little mercury (a catalyst). As a result of reaction the nitrogen present in the organic compound is converted to ammonium sulphate.

23. Discuss the principle of estimation of halogens, sulphur and phosphorus present in an organic compound.

Answer:  Estimation of halogens: It involves oxidising the organic substance with fuming nitric acid in the presence of silver nitrate. The halogen of the substance is thus converted to silver halide which is separated and weighed:
1Weight of organic compound = W gm
weight of silver halide = x g.

Estimation of sulphur: The organic substance is heated with fuming nitric acid but no silver nitrate is added. The sulphur of the substance is oxidised to sulphuric acid which is then precipitated as barium sulphate by adding excess of barium chloride solution. From the weight of BaSO4 so obtained the percentage of sulphur can be calculated.

Estimation of phosphorous: The organic substance is heated with fuming nitric acid whereupon phosphorous is oxidised to phosphoric acid. The phosphoric acid is precipitated as ammonium phosphomolybdate, (NH4)3 PO4 .12MOO3, by the addition of ammonia and ammonium molybdate solution which is then separated, dried and weighed.

24. Explain the principle of paper chromatography.

Answer: This is the simplest form of chromatography. Here a strip of paper acts as an adsorbent. It is based on the principle which is partly adsorption. The paper is made of cellulose fibres with molecules of water adsorbed on them. This acts as stationary phase. The mobile phase is the mixture of the components to be identified prepared in a suitable solvent.

25. Why is nitric acid added to sodium extract before adding silver nitrate for testing halogens?

Answer: Nitric acid is added to sodium extract so as to decompose
NaCN + HNO3 → NaNO3 + HCN
Na2S + 2HNO3 → 2NaNO3 + H2S

26. Explain the reason for the fusion of an organic compound with metallic sodium for testing nitrogen, sulphur and halogens.

Answer: Organic compound is fused with sodium metal so as to convert organic compounds into NaCN, Na2S, NaX and Na3PO4. Since these are ionic compounds and become more reactive and thus can be easily tested by suitable reagents.

27. Name a suitable technique of separation of the components from a mixture of calcium sulphate and camphor.

Answer: Sublimation, because camphor can sublime whereas CaSO4 does not.

28. Explain, why an organic liquid vaporises at a temperature below its boiling point in its steam distillation?

Answer: It is because in steam distillation the sum of vapour pressure of organic compound and steam should be equal to atmospheric pressure.

29. Will CCl4 give white precipitate of AgCl on heating it with silver nitrate? Give reason for your answer.

Answer: No. CCl4 is a completely non-polar covalent compound whereas AgNO3 is ionic in nature. Therefore they are not expected to react and thus a white ppt. of silver chloride will not be formed.

30. Why is a solution of potassium hydroxide used to absorb carbon dioxide evolved during the estimation of carbon present in an organic compound?

Answer:  CO2 is acidic in nature and therefore, it reacts with the strong base KOH to form K2CO3.
2KOH + CO2 → K2CO3+ H2O.

31. Why is it necessary to use acetic acid and not sulphuric acid for acidification of sodium extract for testing sulphur by lead acetate test?
Answer: For testing sulphur sodium extract is acidified with acetic acid because lead acetate is soluble and does not interfere with the test.

32. An organic compound contains 69% carbon and 4.8% hydrogen, the remainder being oxygen. Calculate the masses of carbon dioxide and water produced when 0.20 g of this compound is subjected to complete combustion.

Answer: 

33. 0.50 g of an organic compound was Kjeldahlished. The ammonia evolved was passed in 50 cm3 of IN H2SO4. The residual acid required 60 cm3 of N/2 NaOH solution. Calculate the percentage of nitrogen in the compound.

Answer: 

34. 0.3780 g of an organic compound gave 0.5740 g of silver chloride in Carius estimation. Calculate the percentage of chlorine in the compound.
Answer: Mass of the compound = 0.3780 g
Mass of silver chloride = 0.5740 g

35. In an estimation of sulphur by Carius method, 0.468 of an organic sulphur compound gave 0.668 g of barium sulphate. Find the percentage of sulphur in the compound.

Answer:  Mass of the compound = 0.468 g
Mass of barium sulphate= 0.668 g

36. In Lassaigne’s test for nitrogen in an organic compound, the Prussian blue colour is obtained due to the formation of:
(a) Na4[Fe(CN)6] (b)Fe4[Fe(CN)6]3 (c) Fe2[Fe(CN)6] (d)Fe3[Fe(CN)6]4.

Answer:  (b) is the correct answer.

37. The best and latest technique for isolation, purification and separation of organic compounds is: (a) Crystallisation (b) Distillation (c) Sublimation (d) Chromatography.

Answer: (d) is the correct answer.

38. The following reaction is classified as:
CH3CH2I + KOH (aq) → CH3CH2OH + KI
(a) electrophilic substitution (b) nucleophilic substitution (c) elimination (d) addition.

Answer: (b) It is a nucleophilic substitution reaction. KOH (aq) provides OH ion for the nucleophile attack.

39. How will you separate a mixture of two organic compounds which have different solubilities in the same solvent?

Answer: By fractional crystallisation.

40. An organic liquid decomposes below its boiling point. How will you purify it?

Answer: By distillation under reduced pressure.

41. Suggest a suitable technique for separating naphthalene from kerosene oil present in a mixture.

Answer: Simple distillation.

42. Arrange the following in increasing order of C—C bond length: C2H & C2H4, C2H2.

Answer: C2H2 (120 pm) < C2H4 (134 pm) < C2H6 (154 pm)

43. Name the process used to separate sugar and salt.

Answer:  Fractional crystallisation using ethanol as a solvent.

44. Which gas is liberated in Kjeldahl’s method?

Answer: Ammonia gas (NH3)

45. What is Lassaigne’s extract?

Answer: When organic compound is fused with sodium metal and then extracted by water, it is called Lassaigne’s extract.

46. What type of solids are separated by fractional crystallisation?

Answer: Those solids which are soluble in the same solvent but to a different extent i.e., differ in their solubility.

47. Name a suitable adsorbent used in the process of column chromatography.
Answer: Al2O3 (alumina)

48. Name three types of chromatography.

Answer:  Column chromatography, paper chromatography and thin layer chromatography.

49. Which method is used to extract a compound in aqueous solution?

Answer: Differential extraction.

50. In Carius method, sulphur is estimated by precipitating it as which compound?

Answer:  BaSO4.

51. Which elements are estimated by Liebig’s Method?

Answer:  Carbon and hydrogen.

52. Which type of compounds are purified by steam distillation?
Answer: Steam volatile and insoluble in water.

53. Complete the following:(CH3COO)2 Pb + Na2S →?

Answer: (CH3COO)2 Pb + Na2S → PbS + 2CH3COONa.

54. How will you separate a mixture of Iodine and sodium chloride?

Answer: Sublimation.

55. Why is an organic compound fused with sodium in Lassaigne’s test?

Answer:  It is because sodium is highly reactive and it reacts with elements to form ionic compounds.

56. Write the name of element which is confirmed on adding Na2[Fe(CN)5NO] in sodium extract solution due to appearance of violet colouration.

Answer: Sulphur.

57. Write the structural formula of 4-chloro-2-pentene.

Answer: The structural formula is as:

58. What is the basic principle of chromatography?

Answer: Chromatography is based on the principle of differential adsorption.

59. Write all structural isomers of molecular formula C3H6O.

Answer:

60. (a) What do you understand by homolytic fission?
(b) What are carbanions? Give an example.

Answer: (a) Homolytic fission is breaking of a bond in such a manner that each atom takes one electron each to form free radicals, i.e., A-B → A. + B..

(b) Organic ions which contain a negatively charged carbon atom are called carbanions. e.g., CH3 is carbanion.

61. How will you detect the presence of nitrogen and sulphur in Lassaigne’s extract?

Answer: If freshly prepared FeSO4 and then dil. H2SO4 is added to Lassaigne’s extract, a blue green colouration confirms the nitrogen.

62. Give equation for the following:
(i) Electrophilic Substitution
(ii) Nucleophilic Substitution

Answer:

63. What are electrophiles? Explain electrophile substitution reaction with the help of example.

Answer: A reagent which can accept an electron pair in a reaction is called an electrophile.

64. 0.25 g of an organic compound gave 38 cm3 of N2 at 300 K and 96 k Pa pressure. Calculate % of N in the sample.

Answer:

65. 0.15 g of an organic compound gave 0.12 g of Ag Br by the Carius method. Find percentage of Br in the compound.

Answer:

66. 0 .12 g of an organic compound containing phosphorous gave 0.22 g of Mg2 P2O7 by usual analysis. Calculate the percentage of phosphorous in the compound.

Answer:

67. (a) Which is more suitable method for the purification of a compound in liquid state which decomposes at or below its boiling point?
(b) How will you separate a mixture of ammonium chloride and common salt?

Answer: (a) Distillation under reduced pressure or vacuum distillation (b) Sublimation.

68. Explain hyperconjugation effect. How does hyperconjugation effect explain the stability of alkenes?

Answer: The relative stability of various classes of carbonium ions may be explained by the number of no-bond resonance structures that can be written for them. Such structures are arrived by shifting the bonding electrons from an adjacent C—H bond to the electron-deficient carbon. In this way, the positive charge originally on carbon is dispersed to the hydrogen. This manner of electron release by assuming no-bond character in the adjacent C—H bond is called Hyperconjugation or No-Bond Resonance. The greater the hyperconjugation, the greater will be the stability of the compound. The increasing order of stability can be shown as:

69. What is the basic principle involved in the estimation of nitrogen by Dumas method.
(b) In a Dumas nitrogen estimation method, 0.30 g of an organic compound gave 50 cm3 of N2 collected at 300 K and 715 mm Hg pressure. Calculate the percentage composition of nitrogen in the compound. (Vapour pressure of water at 300 K is 15 mm Hg)
Answer: (a) This method is based upon the fact that nitrogenous compound is heated with copper oxide in an atmosphere of carbon dioxide yield free nitrogen.

70. (a) What is Lassaigne’s extract? Will NaCN give a positive Lassaigne’s test for nitrogen?
(b) Which colour will appear in the Lassaigne’s test if the compound contains both nitrogen and sulphur. 
(c) Why is Lassaigne’s extract prepared in distilled water? Can we detect oxygen in a compound by Lassaigne’s test?

Answer: (a) When organic compound is fused with sodium metal and then extracted by water, it is called Lassaigne’s extract. Yes.
(b) Blood red colour.
(c) Lassaigne’s extract is prepared in distilled water since tap water contains CL ions. No, oxygen cannot be detected by Lassaigne’s test.

71. Explain why (CH3)3C+ is more stable than CH3CH2+.

Answer: (CH3)3C+ has nine alpha hydrogens and has nine hyperconjugation structures while CH3CH2+ has three alpha hydrogens and has three hyperconjugation structures, therefore(CH3)3C+ is more stable than CH3CH2+.

72. Why is an organic compound fused with Sodium for testing nitrogen, halogens and sulphur?

Answer: On fusing with sodium metal the elements present in an organic compound are converted into sodium salts which are water soluble which can be filtered and detected by the respective tests.

73. Under what conditions can the process of steam distillation is used?
Answer: Steam distillation is used to purify the liquids which are steam volatile and not miscible with water.

74. Explain hyperconjugation effect. How does hyperconjugation effect explain the stability of alkenes?

Answer: The relative stability of various classes of carbonium ions may be explained by the number of no-bond resonance structures that can be written for them. Such structures are obtained by shifting the bonding electrons from an adjacent C-H bond to the electron deficient carbon so the positive charge originally on carbon is dispersed to the hydrogen. This manner of electron release by assuming no bond character in the adjacent C-H bond is called Hyperconjugation. Greater the hyperconjugation, greater will be the stability of alkenes.

Check out: https://www.youtube.com/@cgchemistrysolutions


Spread the love
Exit mobile version